Get Latest Mar-2026 Real IN101_V7 Exam Questions and Answers FREE
Truly Beneficial For Your BICSI Exam (Updated 115 Questions)
To take the IN101_V7 exam, candidates need to acquire and study the BICSI Installer 1 course materials, attend the recommended training, and gain hands-on experience to reinforce their learning. IN101_V7 exam proctors strict time limits for answering the questions, so candidates must have a firm grasp of the course materials and be adequately prepared.
BICSI IN101_V7 (BICSI Installer 1) Certification Exam is a prestigious certification exam that is designed for individuals who are interested in pursuing a career in the ICT industry. IN101_V7 exam is designed to test an individual's knowledge and skills in the installation of copper and fiber optic cabling systems. BICSI Installer 1 Exam certification is recognized globally and is highly valued in the industry.
NEW QUESTION # 39
How much sheath of the cable needs to be removed in order to properly terminate an 8P8C?
- A. 6.3mm (0.25")
- B. 25mm (1")
- C. 38 mm (1.5")
- D. 12.7mm (0.5")
Answer: D
NEW QUESTION # 40
Unqualified workers must stay AT LEAST ____ from exposed energized conductors operating at 300 to
50,000 V.
- A. 0.3 m (1')
- B. 30 m (100')
- C. 15 m (50")
- D. 3 m (10')
Answer: D
NEW QUESTION # 41
Which of the following is the first step of the emergency rescue process?
- A. Notify someone
- B. Survey the scene
- C. Secure the area
- D. Contact 911
Answer: B
NEW QUESTION # 42
During the troubleshooting phase, what is the first step?
- A. Repair
- B. Test
- C. Isolate
- D. Verify
Answer: D
NEW QUESTION # 43
A radio station transmits an omnidirectional signal that is received by multiple radios. What type of transmission method is used in this example?
- A. Half-duplex
- B. Full-duplex
- C. Simplex
Answer: C
NEW QUESTION # 44
Which of the following fire ratings refers to the time period that the unexposed surface of a firestop assembly does not exceed 180 degrees C (325 degrees F) above its initial temperature?
- A. FT rating
- B. E rating
- C. S rating
- D. FH rating
Answer: A
NEW QUESTION # 45
Which of the following is a property of an electromagnetic field built around a conductor that opposes any changes in current flow in a circuit?
- A. Impedance
- B. Inductance
- C. Capacitance
- D. Resistance
Answer: B
NEW QUESTION # 46
You are terminating a category 3 cable. What is the maximum permissible amount of untwisting?
- A. 25 mm (1")
- B. 75 mm (3")
- C. 100 mm (4")
- D. 38 mm (1.5")
Answer: B
NEW QUESTION # 47
Which of the following are typically used to support cables between a cable tray and work area outlets?
- A. J-Hook
- B. Innerduct
- C. Pipe hanger
- D. Trapeze
Answer: A
NEW QUESTION # 48
What is the primary purpose of an electrical grounding system?
- A. Enhance personnel safety and reduce the likelihood of a fire hazard
- B. Prevent unauthorized access to the buildings electrical protection system
- C. Protect and provide organization for cables, splices and connectors
- D. Ensure a minimal level of acceptable performance for a building's telecommunications infrastructure
Answer: A
NEW QUESTION # 49
Which topology uses a linear configuration that places all network devices on one length of cable?
- A. Ring
- B. Star
- C. Bus
Answer: C
NEW QUESTION # 50
What is the characteristic impedance of Series-6 coaxial cable?
- A. 100 ohms
- B. 75 ohms
- C. 50 ohms
- D. 25 ohms
Answer: B
NEW QUESTION # 51
Which of the following makes the biggest impression on a customer when you are communicating via email?
- A. Choice of words
- B. Tone of voice
- C. Body language
Answer: A
NEW QUESTION # 52
A purple backboard should be used to identify ________?
- A. Horizontal cable
- B. Network connections
- C. Demarcation point
- D. Common equipment
Answer: D
NEW QUESTION # 53
Which of the following tools is a low-cost cable verifier that can be used to test for opens, shorts, crossed pairs, and miswires in 4- pair cables?
- A. Wire map tester
- B. TDR
- C. Qualification tester
- D. Telephone test set
Answer: A
NEW QUESTION # 54
What method of transmission is used to transmit signals during a telephone call?
- A. Full duplex
- B. Simplex
- C. Half-duplex
Answer: A
NEW QUESTION # 55
Which of the following may provide a demarcation point between the service provider and the customer premises cabling?
- A. Telecommunications enclosure
- B. Entrance facility
- C. Work area
- D. Telecommunications room
Answer: B
NEW QUESTION # 56
What type of coaxial cable is used for video backbone distribution?
- A. RG 58
- B. RG 59
- C. Series 6
- D. Series 11
Answer: D
NEW QUESTION # 57
How long does it take someone to form a first impression?
- A. 1 to 2 minutes
- B. 30 minutes to 1 hour
- C. 10 to 15 seconds
- D. 5 to 10 minutes
Answer: C
NEW QUESTION # 58
What is the bend radius requirement for optical fiber cable when the cable is at rest?
- A. 15 times the cables outside diameter
- B. 20 times the cables outside diameter
- C. 10 times the cables outside diameter
Answer: C
NEW QUESTION # 59
What is the maximum permissible amount of untwisting for category 5e cable and higher?
- A. 12.7 mm (0.5")
- B. 25 mm (1")
- C. 75 mm (3")
- D. 38 mm (1.5")
Answer: A
NEW QUESTION # 60
Which of the following steps should be performed first when terminating a coaxial cable?
- A. Strip the cable
- B. Cut the cable
- C. Verify connector type
- D. Fold back the braiding
Answer: C
NEW QUESTION # 61
......
BICSI IN101_V7 Certification Exam covers the installation of telecommunications cabling systems, including copper and fiber optic cabling, as well as the testing and troubleshooting of these systems. IN101_V7 exam consists of 100 multiple-choice questions and is administered in a proctored environment. Candidates have two hours to complete the exam.
IN101_V7 dumps Free Test Engine Verified By It Certified Experts: https://preptorrent.actual4exams.com/IN101_V7-real-braindumps.html